Swing arm experts please

[Kabuki]

I really want to stretch, and widen the rear. For a 2007 zx-10r I want to put a 240 on her. My question is what stretch should I put on her with the under tail exhaust? Next I would like to use the stock wheels, and well we all know the rear caliper will be a distance from the swing arm. So mounting the rear caliper is a mounting issue unless I make something. Next will the rear tire change my speedo? I know this isn't an issue most people are concerened about but I am. Is the rear tire circomerence different from a 190? I know the chain will have to be longer, what link count will I need with the stretch recommended?? I have stretched bikes before but it seems like finding the correct info and being prepaired is a better thing than flying in and trying to make things work. I appreciate your guys' thought and expertise!

[famous]

I have a 8 inch streatch and I bought a 150 link chain and maybe cut out 10 links. That's with my stock sprockets. The spedo should stay the same .

[heavyhitters]

with wanting to have stock wheels the best way is to have some one or (us lol) CNC you some hubs just to keep the wheel centered also who ever wideins your wheel needs to know that you are haveing hubs made to center the wheel and they will cut the wheel for that must guys just cut one side of the wheel and have it widen but if you want it centered and not off you can have that done also which we can do and with the speedo it will not make the reading off because it reads off your front grear now if you change the front grear you can get a speedo heeler and it will make the speed right I hope this helps and let us know if we can HEAVY HITTER CYCLES :thumbup1::thumbup1:

[dragracer237]

Give Brad a call 941-953-4423. We can make any arm to any spec you want. We're no strangers to the ZX10

[Kabuki]

I know where the speedo reads. I was wondering if the tires where the same circumference? I know this would affect the speed reading. Thats what I was wanting to know in case I would need a speedo healer. I was wanting the wheel centered. I think it would look a bit weird offset?
Dragracer what has been the best length for the ZX10? You guys having experience is what I need. The bike is lowered 3'' so Im a bit worried about clearence between the tires and undertail exhaust. Most ZX10's I have seen stretched go to the sidewinder exhust.
GOD I LOVE THIS FORUM!!!!!! MY new home!!!!! lol

[dragracer237]

I think they look best 8" over and shorter....usually thats where everybody stays at with the liter bikes with a 240 or narrower tire. Check out the Roaring Toyz web site under the gallery section ...we got a few on there

[Predator]

your rear tire will be bigger than stock. your gonna have to run an 18 inch rim instead of your stock 17 for the 240. but when you have your stock one widened they will do that mod also. i wouldnt go to far back with the stretch, maybe 10 at the most. just my opinion. either way it will look really good with those color rims!! dont really know about the undertail exhaust though, someone will chime in on that one for ya

[dragracer237]

Heres on 07 we did for Kawasaki. +8" arm with Performance Machine black chrome 240
http://i45.tinypic.com/240yfs9.jpg

[heavyhitters]

yeah put he wants stock wheels we did a 300 stock wheels centered for a zx14 and how long no more then 14 you can always lower the bike some more and if you buy the kit from us you get free air ride for dec good luck:Riding::Riding:

[Kabuki]

So I'm looking at 8-10'' cool. I'd like to see the zx14 with the stock wheel. Still wondering about the rear brakes, under tail exhaust, and speed. Lovin this forum!

[kawman14733]

Heres on 07 we did for Kawasaki. +8" arm with Performance Machine black chrome 240
http://i45.tinypic.com/240yfs9.jpg

nice looking ride ...

[dirtyred]

What's good with you Kabuki,

I have a 06 ZX-10 and I went with a SS arm with a 240, it's 8" over and I love it just like that I wouldn't go any longer. Now the tire is a 18 instead of a 17, looks a lot better and I haven't seen a differece in the speedo. I did put a power commander on it with a custom dyno. So she will get up and move. With your rear brake all you will have to do is go with steel braided lines and they will cut them so they will run with whatever stretch you decide to go with. If your looking to have your stock wheels converted to a 240 you could do that as well, that is what my friend did with his 14. To be honest with you I would lose the factory exhaust, that is a lot of extra weight and go with a shorty. I have the one that Roaring Toyz makes.

If your interested I have a set of chrome zx-10 factory wheels for sale.

http://i264.photobucket.com/albums/ii164/dirtyred9950/DSC00934.jpg
http://i264.photobucket.com/albums/ii164/dirtyred9950/DSC01483.jpg

[heavyhitters]

looks like you have air ride with the quick up

[dirtyred]

Yeah I have the arnott. It's on a remote

[Kabuki]

What's good with you Kabuki,

I have a 06 ZX-10 and I went with a SS arm with a 240, it's 8" over and I love it just like that I wouldn't go any longer. Now the tire is a 18 instead of a 17, looks a lot better and I haven't seen a differece in the speedo. I did put a power commander on it with a custom dyno. So she will get up and move. With your rear brake all you will have to do is go with steel braided lines and they will cut them so they will run with whatever stretch you decide to go with. If your looking to have your stock wheels converted to a 240 you could do that as well, that is what my friend did with his 14. To be honest with you I would lose the factory exhaust, that is a lot of extra weight and go with a shorty. I have the one that Roaring Toyz makes.

If your interested I have a set of chrome zx-10 factory wheels for sale.

http://i264.photobucket.com/albums/ii164/dirtyred9950/DSC00934.jpg
http://i264.photobucket.com/albums/ii164/dirtyred9950/DSC01483.jpg

Ya I know I'll have to change the brake line no biggie. I already removed the primary throttle plates. I love the undertail exhaust and want to keep it. Could you get your buddies ZX14 rear wheel pictured for me. I would love to see it. I have a wrecked ZX10 in the shop right now that needs wheels, how much?:popcorn

[fRaNKIeP08G]

kabukii my dudee 240 would look so sick!!!!!!!!!!

ask BreakLites i personally just seen a zx10 samee exact year as yours with the same exhaust setup, think they were stock or akras, pretty sure it had a 240, not sure how lowered ur gonna b able to go, be careful so ur pipes aint hitten the tire an mess shit up ona bumpp.

bL is local an i seen the work thats why im sayin em, i can def. say Mark an his boys do some artistic shit over there, good work for the banginn pricee and donee in the right time spand, no slackin ova thea real talkkk.

i seen widend stock wheel setup on the hotwheels gsxr600 he got, it looks so cleann! im gonna show u an upclose pic so u can see the rear tire an hub, centeered spokes and stock sprocket setup. looking good. give me a minute to find it from yesterday.

roaringtoyz ive seen some bikes locally with some sick ass kits.. honestly roaringtoyz is an has been one of my favorites for the years ive ben into this, they can def. make u happy.. check out there pics of bikes they did custom shit lookin good


p.s i love all you guys (no homo)

[fRaNKIeP08G]

dirty red u motha ----A!!!!! ur bikes BANGINN!!!!!!!!! !!! !!!
wOOt wOOt sWOOP

good shit bro thats a sick ass bike my man for realll def. feelin it alott

looks like u got a buncha scrilla scrilla in that farealla mayne!!!

$$$$ thats no budget build !!!!!! nice ride bro

[fRaNKIeP08G]

http://i57.photobucket.com/albums/g207/franksta11/IMG_4415.jpg
http://i57.photobucket.com/albums/g207/franksta11/IMG_4411-1.jpg

[dirtyred]

Ya I know I'll have to change the brake line no biggie. I already removed the primary throttle plates. I love the undertail exhaust and want to keep it. Could you get your buddies ZX14 rear wheel pictured for me. I would love to see it. I have a wrecked ZX10 in the shop right now that needs wheels, how much?:popcorn

Kabuki I would like to get 700 for both of them but make me and offer and we can go from there. They have never been mounted after being chromed. I told the shop that put my 240 on that I wanted to keep my old wheels and I guess they thought I forgot about them and sent them out to get chromed so he could sell them and long story short he was forced to give me the wheels back (chromed) his lost.

http://i45.tinypic.com/rl9rmh.jpg

With the new wheels on it

[dirtyred]

Kabuki

Here are the pic's of the 14 with the stock 240 rim with the factory swingarm with 6 inch blocks
http://i264.photobucket.com/albums/ii164/dirtyred9950/100_0683.jpg
http://i264.photobucket.com/albums/ii164/dirtyred9950/tn.jpg